BOPI 10 BR/2023 REPERTOIRE NUMERIQUE 35 (73) STUMATEC AG, Kalberweid 139, 3635 UEBESCHI (CH) (74) AMINOU NDALA TITA, NAT AFRICA SCI Express Résidence, Quartier Intendance, YAOUNDE (CM) (57) The device is operated with a conventional rotary drive with pile hammer. The torque and the ramming impacts of the drill head are transmitted to a drilling initial tube (8) with drill bit. A sleeve (17) without rotation stands inside the rotating initial tube (8). It rests at the bottom on the inside of the drill bit rotating below it. As a special feature, the sleeve (17) is connected to the rotating drill head by means of a sleeve adapter 725 (21) with axially consecutive parts that can be rotated against each other and a PFR (19) pressure, flushing and recovery tube connected to it. The PFR (19) rotates with the drill head and the drill pipe, and the sleeve adapter (21) communicates with the non-rotating sleeve (17). The PFR is used firstly to apply compressive force to the sleeve (17) from above, secondly to flush it by guiding the flushing water for drilling in 730 the PFR (19) and forcing it out of the sleeve (17), and thirdly to allow the sleeve (17) to be recovered for an almost undisturbed drilling test. Figure 22 Consulter le mémoire
RkJQdWJsaXNoZXIy MTM1NDc3MA==